Product Features
Legend
Style of Service
Single Access
Double Access
Full Service
Misc. Features
Fold Down Stainless Steel Plate Rest
4" Dia. Lock-In-Place Non Skid Casters
Certifications
National Sanitation Foundation
Underwriters Laboratory
Galley Green Construction
1. GALLEY QUALITY
All body components are manufactured in accordance with National Sanitation Foundation Standard 2 (NSF STD 02).
2. GALLEY SERVING LINES IMPROVE FOOD SAFETY
(1) Galley tray slides include “backing plates” to stop spillage.
(2) Galley serving lines are manufactured to UL standards.
(3) Galley materials meet four (4) fire tests by UL:
1. Surface flammability in accordance with ASTM E 162
2. Smoke Generation in accordance with ASTM E 662
3. Toxic Gas Generation in accordance to Boeing BSS 7239 and
4. UL Standard 94-VO for low flammability.
3. GALLEY GOES GREEN USING RECYCLED CONTENT
(1) 70% of Galley body materials are recycled content.
(2) Our intent is to use the maximum allowable recycled content in the material depending upon two variables. First, we have to have enough recycled regrind of the proper color to insure that we do not get color “bleed through”.
(3) Second, the available regrind has to have the physical properties that allow us to certify the material.
4. STANDARD SPECIFICATIONS & FEATURES:
(1) Galley saves money on installation because all equipment is shipped fully assembled. This means that all the food protectors, shelves, tray slides, etc are all mounted and wired into a single cord and plug. You do not have to uncrate anything. We wrap the units in plastic and then blanket pads. They roll off the truck and into position. You remove the shrink-wrap plastic, line them up, and plug them into electric. That is the extent of installation.
(2) All products are manufactured in the USA by craftsmen in Florida and Michigan
(3) Galley costs less to install because of lower power requirements.
(4) Galley costs less to install because of no field assembly.
(5) Galley costs less to maintain daily due to easy cleanability.
(6) Top surface is 14 Ga. 300 series stainless with not less than a #4 finish with square turndown on all sides. Corners are fully welded, ground and polished.
(7) Body facad material is ABS formed plastic with a Haircell finish fastened to a galvaneal steel undercarriage. Body materials have met four fire tests:
(i) Surface flammability in accordance with ASTM E 162,
(ii) Smoke Generation in accordance with ASTM E 662,
(iii) Toxic Gas Generation in accordance to Boeing BSS 7239, and
(iv) UL Listing for meeting UL Standard 94-VO for low flammability.
(8) Body materials have NSF approval for cleanability.
(9) Front panels are removable without tools for cleaning and/or access.
(10) Casters are concealed, plate mounted, swivel, and equipped with toe locks for each caster.
(11) There are no latches or line up locks.
(12) Bodies have pass through bases for access by servers on both sides.
(13) All electrical cords are 9 ½’ long.
(14) Galley conceals the casters
(15) Standard Body Color is Dove White.
5. PLATE RESTS:
(1) Folding plate rests are stainless steel.
6. UNDER SHELVES:
(1) Under shelves are 16-gauge stainless steel with a #4 bright finish.
(2) Under shelves are field adjustable and removable without tools.
(3) The low under shelf is 6” above the floor.
7. TRAY SLIDES:
(1) Galley tray slides include “backing plates” to stop spillage.
(2) Tray Slides are Solid Stainless Steel with 3 Ribs For Extra Strength
(3) Tray Slides include a vertical stainless steel backing plate that extends up from the rear edge to stop spillage on the cabinets.
8. APPROVALS:
(1) Modules bear the National Sanitation Foundation, “NSF Approval”, label for Sanitation. Using component parts otherwise listed by NSF is not satisfactory unless the entire module has been tested and listed by NSF.
(2) Modules bear the Underwriter’s Laboratories, “UL Approval”, label for Electrical and Fire Safety. Using component parts otherwise listed by UL is not satisfactory unless the entire module has been tested and listed by UL.
9. WARRANTY (Continental United States):
(1) 90 days on-site labor on entire module, no charge, no questions asked
(2) 90 days parts on entire module, no charge, no questions asked
(3) The warranty is included at no charge
10. SHIPMENT & DELIVERY:
(1) All accessories are factory installed, mounted and wired to a single cord and plug if applicable.
(2) Products are delivered fully assembled by Manufacturer, shrink wrapped, blanket wrapped, uncrated, and offloaded.
